Purpose: Allows fog lights to be used as daytime running lights.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “ Code 07.”
5 – Select module “0” and click “Long Coding Helper”:
6 – Byte 14:
Check Bit 1 ” Daytime Running Lights (DRL) via Fogs Active“
For the Golf 6 equipped with xenon headlights:
Byte 11: Set Bit 2 , “Permanent Running Light (PRL) via Low Beam Active“
For the Golf 6 equipped with halogen headlights:
Byte 15: Set Bit 6 to 0 , “Daytime Running Light (DRL) via separate lights active“
This post is also available in:
Français (French)
