Purpose: Allows you to set how long the headlight washers remain activated.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “Adaptation – 10”
5 – Select Channel 04 (Headlight Washer Activation Time)
6 – Select a duration between 50 and 10,000 ms (in 50-ms increments).
This post is also available in:
Français (French)
