Purpose: Resets the settings for all remote controls associated with the vehicle.
⚠️ WARNING: After completing this procedure, all remote controls will be deleted and will need to be reprogrammed using the “How to Program a Remote Control” tutorial .
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on ” Select”, then click on ” 46 – Comfort Module“.
4 – Click on “Adaptation – 10”.
5 – Select Channel 00
Set the value to 0 and save
