Purpose: activates the brake/turn signal lights in flash mode during emergency braking.
Procedure:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Turn on the ignition, then launch the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
Byte 16:
Bit 1: Check “Emergency Brake Flashing via Brake Light active” (to activate brake lights)
Bit 2: Check “Emergency Brake Flashing via Turn Signal active” (to activate turn signals)
This post is also available in:
Français (French)
