Purpose: to set the number of flashes for the “Comfort flashing” option.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click “Adaptation – 10.”
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Comfort Turn Signal.”
7 – Choose between “1” and “5,” then confirm.
This post is also available in:
Français (French)
