Purpose: Enables the display of OPS speed cameras on the car radio screen.
Please note: The vehicle must be equipped with a compatible car radio (RCD-310, RCD-510, RNS-315, RNS-510).
Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click “Select,” then click “10-Parking Assistance.”
4 – Click on “Security Access – 16,” then enter the code “71679.”
5 – Click on “Coding – 07,” then click on “Long Coding Helper.”
6 – Select Byte 0:
Bit 4: Tick “Optical illustration active”.
This post is also available in:
Français (French)
