Purpose: Activates xenon (or halogen) headlamps instead of fog lamps for Coming Home and Leaving Home.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
Byte 17 :
Bit 3: Uncheck “Coming-Home (CH) via Fog-Light active”.
This post is also available in:
Français (French)
