Purpose: Enables automatic time changes on the MIB.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Security Access – 16” then enter the code“20103“.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Summertime-automatic“
7 – On this same page, there is a second drop-down menu, but it’s located toward the bottom
.
From this menu, select “Europe” and then confirm.
This post is also available in:
Français (French)
