Purpose: Allows you to change the number of flashes after activating the comfort turn signals.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “Adaptation – 10”
5 – Select Channel 43 (Lights: Comfort Turn Signals (Cycles) from the drop-down list)
Select a value between 1 and 5
This post is also available in:
Français (French)
