Purpose: Enables the instrument cluster lighting when the parking lights are on.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
3 – Click on“Select”, then click on“17 – Instruments“.
4 – Click on“Adaptation – 10”.
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Illumination_algorithm-Scale_switching_algorithm“
6 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “lds” and then confirm. (Source: Parking Light)
This post is also available in:
Français (French)
