Purpose: Allows the windows to close automatically when the car is locked.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
2 – Click “Select,” then click “19 – Gateway.”
4 – Click on “Adaptation – 10.”
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “ZV Komfort Fensterheber – Komfortschliessen Brasilien“
6 – On the same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select the value “Active” and then confirm.
Line 2:
3 – Click “Select,” then click “19 – Gateway.”
4 – Click on “Adaptation – 10.”
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “ZV Komfort Fensterheber – BAP Komfortschliessen Brasilien“
6 – On the same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select the value “Active” and then confirm.
This post is also available in:
Français (French)
