Purpose: Allows you to configure the LED taillights to flash out of phase. (The outer and inner taillights flash alternately, Pace Car Lights)
Watch out! There are 4 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 16BLK SLB35BLK SL KC9-Lichtfunktion A 16“
7 – On this same page, there is a second drop-down menu further down
.
From this menu, select “Blinken Links Dunkelphase” and then confirm. (Original: Blinken Links Hellphase)
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 16BLK SLB35BLK SL KC9-Lichtfunktion C 16“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Blinken Links Hellphase” and then confirm. (Source: Blinken Links Dunkelphase)
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 17TFL R BLK SRB3TFL R BLK SR KC3-Lichtfunktion A 17“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Blinken Retchs Dunkelphase” and then confirm. (Original: Blinken Retchs Hellphase)
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 17TFL R BLK SRB3TFL R BLK SR KC3-Lichtfunktion C 17“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Blinken Retchs Hellphase” and then confirm. (Original: Blinken Retchs Dunkelphase)
This post is also available in:
Français (French)
