Purpose: Enables the daytime running lights (DRL) to turn on along with the fog lights.
Warning! There are 2 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte12NL LB45-Lichtfunktion B 12“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Daytime running lights” and then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte13NL RB5-Lichtfunktion B 13“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Daytime running lights” and then confirm.
This post is also available in:
Français (French)
