Function: Enables you to activate the feature that stops the windshield wipers when the key is removed (stopping the wipers immediately in their current position) or to deactivate it so that the wipers move to the parking position (against the windshield) when the key is removed.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347 “.
5 – Click on“Adaptation – 10 “.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Windshield wiper stop disabled on KL15 “
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “active” (stops immediately when the key is removed) or “inactive” (parking position), then confirm.
This post is also available in:
Français (French)
