Purpose : to change the illumination of the hands and dial.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 17 – Instruments.”
4 – Click on “Adaptation – 10 ”.
5 – Select Channel 19 :
Set the first digit of the code (?xxxx) to the value corresponding to the desired display:
0 = Hands off and dial off (with the ignition on and headlights off)
1 = Hands on and dial off (with the ignition on and headlights off)
2 = Hands off and dial on (ignition on, headlights off)
3 = Dials and needles on (ignition on, headlights off)
This post is also available in:
Français (French)
