Purpose: Automatically lowers the passenger-side rearview mirror when reversing.
Le bouton de réglage des rétroviseurs doit être en position “R“, pour que le rétroviseur passager s’abaisse automatiquement.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“52 – Passenger door“.
4 – Click on“Coding – 07“, then on“Long Coding Helper“.
5 – Select byte “4“
Then check bit “2“: “Reserve Gear Mirror Dipping active“
and bit “3“: “Position Memory for Reserve Gear Mirror Dipping active“
This post is also available in:
Français (French)
