Purpose: to activate closing and opening of the windows and sunroof with the remote control WITHOUT remaining pressed until the windows are completely closed.
Procedure:
1 – With the engine off and the ignition turned off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic port.
2 – Turn on the ignition and launch the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 46 – Central Conv.”
4 – Click ” Encoding 07,” then “Long Coding Helper”
5 – Byte 6:
Bit 6: Check “Comfort Function Automatic Closing”
- Uncheck “Comfort function power windows/sunroof via remote control inactive”.
- Check “Comfort opening power windows via remote control active”.
- Check “Comfort closing power windows via remote control active”.
- Check “Closing sunroof via remote control active” (sunroof)
Line 2:
3 – Click “ Select,” then click “ 46 – Comfort Module.”
4 – Click “ Adaptation – 10”
Channel 17 (Comfort function)
Set value to 1
Pressing the remote control’s close button for 3 seconds will first lock the doors and then close the windows, without having to keep the button pressed until they are fully closed.
If you don’t have this box on your calculator, put this:
module 46, long coding and on the:
Byte 03: 40
Byte 04: 3F
Byte 05: 3F
This post is also available in:
Français (French)
