Purpose: to lower the spoiler after the doors have been closed centrally.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic port.
2 – Turn on the ignition and launch the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 46 – Central Conv.”
4 – Click on “Coding – 07,” then click on “Long Coding Helper.”
5 – Select Byte 13:
internal Bit 7: Uncheck “Rear Spoiler Comfort Lowering via Door Lock active” to disable it
This post is also available in:
Français (French)
