R8 (42) – Automatic door locks

VAG Coding VCDS ODBeleven Audi R8

Purpose: to set automatic door locking from 15km/h.

Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1 :

3 – Click on“Select”, then click on“46 – Comfort module“.

4 – Click on“Coding – 07” then on ” Long Coding Helper”.

Byte 0:
Bit 2: Check “Auto-Lock (automatic locking from 15 km/h)”.

This post is also available in: Français (French)

error: Contenu Protégé ! Content is protected !!
Enable Notifications OK No thanks