Purpose: to lower the spoiler after the doors have been closed centrally.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select” then click on “46 – Central Conv” or “09 – Cent. Elect.” .
4 – Click on “Coding – 07,” then click on “Long Coding Helper.”
5 – Select Byte 13:
Bit 7: Uncheck “Rear Spoiler Comfort Lowering via Door Lock active” to disable it
This post is also available in:
Français (French)
