Function: Enables the rear light animation in RSQ8 mode. (RS Tail Lights)
The RS lighting package can only be activated if the car is already equipped with the standard lighting package and the appropriate 8SQ High taillights.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click“46 – Comfort Module.”
4 – Click on “Coding – 07” then “Long Coding Helper”.
5 – Select Byte 37: (Bits 0, 1, 2, and 3 should already be set)
Set Bit 4 (SBBR_variant)
This post is also available in:
Français (French)
