Purpose: activates High Beam Assist for vehicles with Sign Assist and/or Lane Assist options.
Caution: Please use these instructions only on vehicles equipped with xenon headlights or “standard/static” LED headlights. In vehicles equipped with Matrix LED headlights, this feature is always enabled by default.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding – 07“, then on“Long Coding Helper“.
5 – Select byte “05“
Check Bit 0 “mmi_fla_glw_mxb,active“
Then, in the drop-down menu for Bit “5-7,” select “60 high_beam_functions,head_light_assistant“
Line 2:
3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist “.
4 – Click on“Coding – 07“, then on“Long Coding Helper“.
5 – Select byte“21”
Then, in the“Bit 5-7” drop-down menu, select “20 AFS_coding_Light_Assist,High_Beam_Assist”
This post is also available in:
Français (French)
