Purpose: Enables you to open and close the windows and sunroof using the remote control.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click“46 – Comfort Module.”
4 – Click “Encoding – 07,” then click “Long Coding Helper.”
5 – Select byte “2“
Then check bit “2“
This post is also available in:
Français (French)
