Purpose: Allows you to disable the roller shade’s comfort mode when locking or unlocking.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 (Disable the roller shade when the comfort lock is engaged) :
The roof roller shade closes when the comfort mode is activated. You can adjust this behavior so that the roof roller shade remains in its current position.
3 – Click “ Select,” then click “ CA – Sunroof.”
4 – Click on “Adaptation – 10”
5 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “IDE11842-MAS13330-Komfortfunktionen-Komfortschließen Dachrollo” / “Comfort Features – Comfort Closing Roof Shade“
6 – On this same page, there is a second drop-down menu, but further down
.
From this menu, select “ No Active ” and then confirm.
Line 2 (Disable the roller shade when the comfort mode is activated):
The roof roller shade opens when the “Comfort” mode is activated. You can adjust this behavior so that the roof roller shade remains in its current position.
3 – Click “ Select,” then click “ CA – Sunroof.”
4 – Click on “Adaptation – 10”
5 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “IDE11842-MAS13329-Komfortfunktionen-Komfortöffnen Dachrollo” / “Comfort Features – Comfort Opening of Roof Shade“
6 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “No Active ” and then confirm.
This post is also available in:
Français (French)
