Purpose: to set the number of flashes for the “Comfort flashing” option.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “46 – Central Conv.“.
4 – Click “Adaptation – 10.”
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Blinkzyklen” or “Cycles de clignotement” or “Turn Signal Control – Freeway flashing cycles“
6 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose between“3” and“5” and confirm.
This post is also available in:
Français (French)
