Purpose: to activate the flashers once the comfort closure has been completed.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “Adaptation – 10”
5 – Select Channel 17 (Visual Comfort Operation/Closing Confirmation)
6 – Set new value to 1
This post is also available in:
Français (French)
