Purpose: to set the distance between the kerb and the car during Audi Park Assist.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “10 – Park/Steer Assist” / “10 – Parking Assist”
4 – Click “Security Access – 16,” then enter the code “71679“
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Abstand zum Bordstein” / ” Distance to curb” / “Distance from the curb”
7 – On this same page, there is a second drop-down menu toward the bottom
of the page.
From this menu, select the distance of your choice (in cm). The default value is “15 cm“; then click “Confirm.”
This post is also available in:
Français (French)
