Purpose: Enables the startup sound (welcome sound), which plays when the MMI or the vehicle is turned on.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click “Adaptation – 10.”
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Vehicle configuration – vehicle_readiness_sound“
6 – On this same page, there is a second drop-down menu toward the bottom
of the page.
From this menu, select “active” and then confirm.
This post is also available in:
Français (French)
