Purpose: to activate US nightlights with turn signals.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic port.
2 – Turn on the ignition, then launch the VCDS program.
Line 1:
3 – Click “Select,” then click “09 – Power Control Unit .”
4 – Click on “ Coding – 07.”
5 – Select Byte 10:
Bit 0: Check “ Turn signal active as side marker “
This post is also available in:
Français (French)
