Purpose: activates the display of reversing radars on the MMI, for vehicles with the Audi Parking System rear option only.
Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click“76 – Parking Assistance.”
4 – Click on ” Code 07.”
5 – Replace the second “0” (from the left) with a “2”.
Ex: Replace “0001106” with “0201106”.
Coding :
0?xxxxx: Visual Display
0 = without Visual Display on MMI
2 = with Visual Display on MMI
This post is also available in:
Français (French)
