Purpose: Allows you to adjust the speed thresholds for activating and deactivating the high-beam assist feature.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Adjust high beam assistant activation speed threshold :
3 – Click “Select,” then click “A5 – Front Camera” or “20 – High Beam Assistant.”
4 – Click “Security Access – 16,” then enter the code “ 20103”
5 – Click “Adaptation – 10”
6 – Select Channel : “Activation speed for the high-beam assistant” or “Aktivierungsgeschwindigkeit für Fernlichtassistent”
Adjust value accordingly
Default: 57 km/h
Adjusting the high beam assistant deactivation speed threshold :
3 – Click “Select,” then click “A5 – Front Camera” or “20 – High Beam Assistant.”
4 – Click “Security Access – 16,” then enter the code “ 20103”
5 – Click “Adaptation – 10”
6 – Select Channel : “Speed threshold for high-beam recommendation” or “Geschwindigkeitsschwelle für Fernlichtempfehlung”
Adjust value accordingly
Default: 27 km/h
This post is also available in:
Français (French)
