Purpose: to activate the radar display on the MMI with the Audi Parking System rear option only.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click“76 – Parking Assist.”
4 – Click on “ Code 07.”
5 – Replace the second “0” (from the left) with a “2”.
Ex: Replace “0001216” with “0201216”.
Coding :
0?xxxxx: Visual Display
0 = without Visual Display on MMI
2 = with Visual Display on MMI
Module Compatibility List
| 4F0 910 283 | 4 sensors (no graphic support) |
| 4F0 910 283 A | 4 sensors (no graphic support) |
| 4F0 910 283 B | 4 sensors (graphic support) |
| 4F0 910 283 C | 8 sensors (graphic support) |
| 4F0 910 283 D | 4 sensors (graphic support) |
| 4F0 910 283 E | 8 sensors (graphic support, rear view camera support) |
| 4F0 910 283 F | 4 sensors (graphic support, rear view camera support) |
| 4F0 910 283 G | 8 sensors (graphic support, rear view camera support) |
| 4F0 910 283 H | 8 sensors (graphic support, rear view camera support) |
This post is also available in:
Français (French)
