Purpose: Allows you to adjust the brightness of the LEDs (DRL) when the headlights are on.
The original LED intensity is set to 9% of power with the lights on.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click ““09 – Cent. Elect.”.”
4 – Click “Security Access – 16,” then enter the code “20113”
5 – Click on“Adaptation – 10”
6 – Select Channel 3:
Enter a new value between 5 and 100
(a value less than 5% will generate an error code and a warning on the OBD)
This post is also available in:
Français (French)
