Purpose: Allows you to activate memory 1 for distance traveled, average speed, time since departure, etc. These memory values will be reset after the engine has been off for more than 2 hours.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click “Adaptation – 10.”
5 – Select Channel 19
Set the second digit of the code (x?xxx) to the value corresponding to the desired option:
0 = Memory 2 only (permanent memory)
1 = Memory 1 + Memory 2
This post is also available in:
Français (French)
