Purpose: to display the pilot light on the counter.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 17 – Instruments.”
4 – Click on “ Code 07.”
5 – Remove 02 from digits in position 3-4 of the code (00??xxx).
(Ex: 0023004becomes 0021004)
This post is also available in:
Français (French)
