Purpose: to maintain the intensity of the daytime running lights (DRL) with the indicators.
(A3 Phase 1 only)
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “ 09 – Cent. Elect.”
4 – Click on “Security Access – 16” then enter the code “31347”.
5 – Click “ Adaptation – 10.”
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Leuchte2SL VLB10-Lichtfunktion E 2”.
7 – On this same page, there is a second drop-down menu, but towards the bottom of the page.
On this menu, select “not active”. not active ” instead of “Blinken links aktiv (beide Phasen)”, then confirm.
Line 2:
3 – Click “Select,” then click “ 09 – Cent. Elect.”
4 – Click on “Security Access – 16” then enter the code “31347”.
5 – Click “ Adaptation – 10.”
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ Leuchte3SL VRB21-Lichtfunktion E 3”.
7 – On this same page, there is a second drop-down menu, but towards the bottom of the page.
On this menu, select “not active”. not active ” instead of ” Blinken rechts aktiv (beide Phasen) “, then confirm.
This post is also available in:
Français (French)
