Purpose: Turns on the corner lights on the side where the turn signal is activated.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “static AFS Light-Vorschrift.”
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “FMVSS 517108” and then confirm.
This post is also available in:
Français (French)
