Purpose: Enables vehicle lock/unlock confirmation with beeps.
The vehicle must be equipped with the factory-installed alarm.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “46 – Comfort Module.”
4 – Click on“Coding 07”.
5 – Add +1024 to the existing coding :
This post is also available in:
Français (French)
