Purpose: Allows you to set automatic door locking from 15km/h, and unlocking when the key is removed.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “46 – Comfort Module.”
4 – Click on“Coding 07”.
5 – Add +32 to the existing coding :
This post is also available in:
Français (French)
