VW Scirocco 3 (13) (2008-2017) / Scirocco R / GTS
Scirocco (13) – Activate Bluetooth on RNS 315
Purpose: to activate Bluetooth on the RNS 315. ATTENTION: Not all RNS-315 are equipped with a Bluetooth module. Module compatibility list3C0 035...
Scirocco (13) – Activate Coming / Leaving Home
Purpose: Activates Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Scirocco (13) – Activate daytime running lights (DRL) only with headlight switch in Auto position
Purpose: to activate daytime running lights (DRL) only when the light switch is in Auto position. Procedure: 1 - Engine off, ignition...
Scirocco (13) – Activate daytime running lights with fog lamps (DRL)
Purpose: Allows fog lamps to be used as daytime running lights. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Scirocco (13) – Activate Driving School mode (RCD 210/RCD 310)
Purpose: Allows you to add a Driving School mode view to the RCD 210, RCD 310 that displays turn signals, speed ......
Scirocco (13) – Activate Off-Road mode on Discover PQ
Purpose: to add Offroad mode to Discover PQ with navigation. Warning! There are 3 lines of coding to do here. Proceed :...
Scirocco (13) – Activate rearview camera (retrofit)
Purpose: To activate the reversing camera after installation on the RCD 510/330/360/440 and RNS 315/510 or Discover PQ (retrofit). Procedure: 1 -...
Scirocco (13) – Activate RNS 510 voice control
Purpose: to activate voice control on the RNS 510 (SDS). ATTENTION: RNS 510 firmware must be version v2660. Activating voice control brings...
Scirocco (13) – Activate turn signals in US mode
Purpose: to activate US indicators. (Scirocco phase 1 only) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Scirocco (13) – Adapting brake assist
Purpose : to configure brake assist. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Scirocco (13) – Add daytime running lights (DRL) to ODB
Purpose: to add DRL activation/deactivation to the ODB (MFA). (2011+) Procedure : 1 - Engine off, ignition off, connect your official VAG-COM...
Scirocco (13) – Add mirror adjustment in ODB
Purpose: to add the mirror adjustment menu, synchronize or individual in the ODB (MFA). (2011+) Procedure : 1 - Engine off, ignition...
Scirocco (13) – Adjusting light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Scirocco (13) – Adjusting the volume of the reversing beep
Purpose: to adjust the volume of the reversing beep. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Scirocco (13) – Ambient lighting intensity
Purpose: Used to adjust ambient lighting intensity. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Scirocco (13) – Automatic closing of windows and roof in case of rain
Purpose: Automatically closes windows and sunroof when it rains. The vehicle must be locked with the remote control for this to work....
Scirocco (13) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Scirocco (13) – Automatic door unlocking
Purpose: to set automatic door unlocking when the ignition key is removed. Procedure: 1 - Engine off, ignition off, connect your official...
Scirocco (13) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Scirocco (13) – Automatic headlight activation in case of rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure : 1 - Engine off,...
Scirocco (13) – Automatically folding mirrors
Purpose: Automatically folds mirrors when vehicle is locked. For 4th generation door modules (models from 2013) activation is possible with VCDS VAG-COM...
Scirocco (13) – Change Discover start logo
Purpose: Allows you to display another logo at launch, and a color to match the finish of your Discover PQ. Proceed :...
Scirocco (13) – Change the theme of RCD/RNS 510
Purpose: to change the display theme of the RCD 510 and RNS 510. Procedure: 1 - Engine off, ignition off, connect your...
Scirocco (13) – Changing the image of the RCD/RNS OPS
Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510. Procedure: 1 - Engine...
Scirocco (13) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Scirocco (13) – Coming / Leaving Home with fog lamps
Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...
Scirocco (13) – Coming / Leaving Home with the Xenons
Purpose: Activates xenon headlamps instead of fog lamps for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect...
Scirocco (13) – Coming Home time setting
Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...
Scirocco (13) – Corner lights activation
Purpose: to activate cornering lights with fog lamps. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Scirocco (13) – Corner Lights in reverse
Purpose: to activate the cornering lights with the fog lamps when reversing. Procedure : 1 - Engine off, ignition off, connect your...
Scirocco (13) – Daytime running lights deactivation (DRL) with handbrake on
Purpose: to deactivate the daytime running lights (DRL) when the handbrake is engaged. (After the end of 2009) Procedure: 1 - Engine...
Scirocco (13) – Deactivate brake pad warning light
Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no...
Scirocco (13) – Deactivate MirrorLink
Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover PQ MIB. The Mirrorlink service is no longer available since June...
Scirocco (13) – Deactivate rear wiper when reversing
Purpose: to deactivate automatic activation of the rear wiper. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Scirocco (13) – Deactivate windshield washer indicator
Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off, connect...
Scirocco (13) – Deactivating fog lamps (retrofit)
Purpose: To deactivate/activate the fog lamps for retrofitting R front bumpers without bulb errors (to activate them, check the bits). Procedure: 1...
Scirocco (13) – Defrost time setting
Purpose: to set the operating time for mirror and rear window defrosting. Procedure: 1 - Engine off, ignition off, connect your official...
Scirocco (13) – Delete alarm belt
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Scirocco (13) – Disable AM frequency on Discover
Purpose: to deactivate the AM radio frequency on the Discover PQ (the AM radio frequency is rarely used, unlike the FM radio...
Scirocco (13) – Disable plate light control (ODB LED error)
Purpose: Disables license plate light control. Useful when installing LED bulbs without resistance or for error prevention. Procedure: 1 - Engine off,...
Scirocco (13) – Door lighting (retrofit)
Purpose: Enables door lighting to be activated after retrofitting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Scirocco (13) – Door lock confirmation (key)
Purpose : To set the door lock confirmation when the key is used (for Scirocco before end 2009). Proceed : 1 -...
Scirocco (13) – Door lock confirmation (Remote control)
Purpose : to set door lock confirmation when using the remote control. Procedure: 1 - Engine off, ignition off, connect your official...
Scirocco (13) – Door unlock confirmation (Remote control)
Purpose : to set the door unlock confirmation when using the remote control. Procedure: 1 - Engine off, ignition off, connect your...
Scirocco (13) – Door unlocking confirmation (Key)
Purpose : Enables door unlocking confirmation to be set when the key is used (for Scirocco before the end of 2009). Proceed...
Scirocco (13) – Electronic differential lock (XDS)
Purpose: to activate the electronic differential lock (XDS). The electronic differential lock (XDS) is an extension of the well-known EDS function. However,...
Scirocco (13) – Enable USB port for iPhone CarPlay (retrofit)
Purpose: Enables the USB port for iPhone CarPlay accounting (after activating App Connect and changing the USB and/or USB cable) for Discover...
Scirocco (13) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Scirocco (13) – Fog lamps with high beam
Purpose: to deactivate the fog lamps when the high beam is switched on, so that they don't go out when the high...
Scirocco (13) – Fold down mirrors with ignition off and door open
Purpose : Allows mirrors to be folded down even after the ignition has been switched off and a door opened. (Also enables...
Scirocco (13) – Headlight washer duration setting
Purpose: to set the duration of headlamp washer activation. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Scirocco (13) – Hill Hold Control
Purpose: to activate Hill Hold Control. Hill Hold Control maintains brake pressure for a few seconds after prolonged application of the brake...
Scirocco (13) – Leaving Home time setting
Purpose: to set the length of time the headlights remain on after the car is unlocked. Procedure: 1 - Engine off, ignition...
Scirocco (13) – Lowering the passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
Scirocco (13) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. When you start your Scirocco, the needles on...
Scirocco (13) – ODB Color versions
Purpose: Allows you to select the version of your color ODB. Proceed : 1 - Engine off, ignition off, connect your official...
Scirocco (13) – Oil temperature on the ODB
Purpose: to activate the Oil Temperature Display in your Grand ODB. It sometimes happens that certain cars don't have this value available...
Scirocco (13) – OPS speed camera display on car radio screen
Purpose: Enables the display of OPS speed cameras on the car radio screen. Please note: The vehicle must be equipped with a...
Scirocco (13) – Permanent headlight deactivation (Scandinavian)
Purpose: to deactivate permanently switched-on low-beam headlamps, which are only activated when set to Auto, and to have only parking lights on...
Scirocco (13) – Radar deactivation speed (or rearview camera)
Purpose: Selects the speed at which the reversing camera and radars are deactivated. Procedure: 1 - Engine off, ignition off, connect your...
Scirocco (13) – Selective door unlocking
Purpose : Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all...
Scirocco (13) – Sound reduction on OPS activation
Purpose: Automatically lowers speaker volume when OPS is activated. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Scirocco (13) – Speed limit display RNS 510
Purpose : to display the speed limit on the RNS 510 navigation screen. Procedure: 1 - Engine off, ignition off, connect your...
Scirocco (13) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Only compatible with Gateway 7N0! Temperature deactivation method. Proceed : 1 - Engine off, ignition...
Scirocco (13) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...