VW T-Roc A1 (2017+ )
T-Roc (A1) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
T-Roc (A1) – 2-cylinder mode display on ODB
Purpose: Activates or deactivates the 2-cylinder mode message on the on-board computer for vehicles equipped with the cylinder deactivation option (Bluemotion ACT)....
T-Roc (A1) – Activate “Think Blue Monitor” mode
Purpose: Displays the “Think Blue Monitor” mode: “ECO MODE” graph for MIB2. Warning! There are 2 lines of coding to do here....
T-Roc (A1) – Activate a second phone via Bluetooth
Purpose: to connect two Bluetooth-enabled phones simultaneously to Discover. Warning! There are 5 lines of coding to do here. Proceed : 1...
T-Roc (A1) – Activate air-conditioning fan speed profiles
Purpose: to activate air-conditioning fan speed profiles. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
T-Roc (A1) – Activate AirCare memory function
Purpose: to activate the AirCare function's air-conditioning memory. In the factory setting, this is deactivated when you leave the vehicle. Once set,...
T-Roc (A1) – Activate Climatronic Tactile (retrofit)
Purpose: to code and adapt the Touch Climatronic panel so that the AC climate control/compressor is functional after installation. (Touch Climatronic) (Retrofit)...
T-Roc (A1) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
T-Roc (A1) – Activate door bottom lights (retrofit)
Purpose: to activate door bottom lights after retrofitting. Front door connection : Pin 5 (ground, if wire is already connected, plug it...
T-Roc (A1) – Activate driver profile customization
Purpose: to activate driver profiles on the ODB or Virtual Cockpit and on the MIB screen, to be selected according to the...
T-Roc (A1) – Activate Driving School mode
Purpose: Adds a driving-school mode view to Discover, displaying turn signals, speed, etc. (also ideal for accompanied driving). Warning! There are 3...
T-Roc (A1) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the...
T-Roc (A1) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
T-Roc (A1) – Activate Off-Road mode on Discover
Purpose: to add Offroad mode to Discover MIB2.5 with navigation. Warning! There are 3 lines of coding to do here. Proceed :...
T-Roc (A1) – Activate parking lights on both sides
Purpose: activates the parking lights on both sides of the vehicle, instead of the default single-side activation via the turn signal switch....
T-Roc (A1) – Activate rearview camera (retrofit)
Purpose: To activate the reversing camera after it has been installed on the Discover (camera retrofit Low or High). Procedure: 1 -...
T-Roc (A1) – Activate speedometer lighting with parking lights
Purpose: to activate the instrument cluster lighting when the parking/position lights are switched on. Proceed :1 - Engine off, ignition off, connect...
T-Roc (A1) – Activate trailer hitch (retrofit)
Purpose: Enables trailer / towbar retrofit. Please note! Adaptation in motor control unit 01 is not accepted for some models. In this...
T-Roc (A1) – Activate window operation with ignition off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
T-Roc (A1) – Activate/deactivate daytime running lights (DRL) with Discover
Purpose: to activate/deactivate daytime running lights (DRL) from Discover in the CAR menu. ATTENTION to your country's regulations and technical inspection for...
T-Roc (A1) – Activate/deactivate windshield wipers on key removal
Purpose: to activate windshield wiper stop when the key is removed (wipers stop directly in the position they were in) or to...
T-Roc (A1) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
T-Roc (A1) – Adjust Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
T-Roc (A1) – Adjustment of air-conditioning LED intensity
Purpose: to customize the illumination intensity of the air-conditioning indicators. Warning! There are 3 lines of coding to do here. Proceed :1...
T-Roc (A1) – Ambient Light activation (colors)
Purpose: to activate the Ambient Light option on your MIB for changing screen and Virtual Cockpit colors (depending on your MIB version,...
T-Roc (A1) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
T-Roc (A1) – Automatic folding of mirrors
Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...
T-Roc (A1) – Automatic headlamp activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
T-Roc (A1) – Automatic window closure in the event of rain
Purpose: Automatically closes windows and sunroof when it rains. Watch out! There are 4 lines of coding to do here. Proceed :...
T-Roc (A1) – Battery charge level on ODB
Purpose: Displays battery charge level on the ODB (on-board computer). Handling procedure : 1 - Switch off the ignition 2 - Press...
T-Roc (A1) – Change Discover start logo
Purpose: Allows you to display another logo at launch, and a color to match the finish of your Discover Média or Pro....
T-Roc (A1) – Change ODB language
Purpose: Select the language of your on-board computer. Perfect if you're importing your T-Roc. Proceed : 1 - Engine off, ignition off,...
T-Roc (A1) – Changing the Virtual Cockpit display
Purpose: to modify and customize the Active Info Display / Virtual Cockpit. Depending on the setting, the display of the counter and/or...
T-Roc (A1) – Comfort blinker
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
T-Roc (A1) – Coming Home automatic
Purpose: Automatically activates the Coming Home function (no need to make a headlight call). Proceed : 1 - Engine off, ignition off,...
T-Roc (A1) – Coming Home on opening the driver’s door
Purpose: Starts Coming Home when the driver's door is opened, not when the ignition key is removed. Proceed : 1 - Engine...
T-Roc (A1) – Compass display on ODB
Purpose: to display a compass on the ODB (on-board computer), if you have GPS navigation (NAV), and to change its position on...
T-Roc (A1) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the Trip Computer/Virtual Cockpit. Note: these changes affect the display of instantaneous consumption, average...
T-Roc (A1) – Daytime running light deactivation (DRL) using the handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
T-Roc (A1) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Proceed : 1 - Engine off,...
T-Roc (A1) – Deactivate audio reduction for parking assistance
Purpose: deactivates sound reduction when reverse gear is engaged or parking aid is activated manually. Procedure: 1 - Engine off, ignition off,...
T-Roc (A1) – Deactivate coupling between roller blind and sunroof
Purpose: cancels the coupling of roller blinds and panoramic sunroofs, allowing them to be adjusted separately. Procedure: 1 - Engine off, ignition...
T-Roc (A1) – Deactivate driving mode selection LED
Purpose: to deactivate the LED display when DriveMode Eco, Sport or Individual is set. The center console button LED is off in...
T-Roc (A1) – Deactivate ESP
Purpose: to deactivate ESP and/or add Sport ESC mode from Discover. Proceed : 1 - Engine off, ignition off, connect your official...
T-Roc (A1) – Deactivate horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
T-Roc (A1) – Deactivate MirrorLink
Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover MIB. The Mirrorlink service is no longer available since June 1,...
T-Roc (A1) – Deactivate open door alarm with contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
T-Roc (A1) – Deactivate rear fog light warning
Purpose: to deactivate the warning message on the dashboard, which will remind you to turn on the rear fog lights when you...
T-Roc (A1) – Deactivate rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
T-Roc (A1) – Deactivate right-hand overtaking prevention
Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left...
T-Roc (A1) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (Lining change mode) Proceed...
T-Roc (A1) – Deactivation of Corner Lights when reversing
Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
T-Roc (A1) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
T-Roc (A1) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
T-Roc (A1) – Delete LED fog lamp error
Purpose: removes the ODB error after installation of LED fog lamps. Watch out! There are 4 lines of coding to do here....
T-Roc (A1) – Disable AM frequency on Discover
Purpose: to disable the AM radio frequency on Discover (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1 -...
T-Roc (A1) – Disable OPS warning message
Purpose: To deactivate the “Check Distance!” / “Please check surroundings” / “Look! Safe to move?” message which appears on Discover when parking...
T-Roc (A1) – Display of fan speed on air-conditioning in Auto mode
Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode / works with touch-sensitive climate...
T-Roc (A1) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
T-Roc (A1) – Electronic differential lock (XDS)
Purpose: to set the electronic differential lock (XDS) The electronic differential lock (XDS) is an extension of the well-known EDS function. XDS...
T-Roc (A1) – Fender / Dynaudio logo at Discover start-up
Purpose: To display the Fender or Dynaudio logo when your Discover Media or Pro is launched. Procedure: 1 - Engine off, ignition...
T-Roc (A1) – Flash mode lights during emergency braking
Purpose: activates flashing lights during emergency braking. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
T-Roc (A1) – Fog lamp on open door side
Purpose: to ensure that when a door is opened on the left, the fog lamp on the left lights up and vice...
T-Roc (A1) – Fold down mirrors with ignition on
Purpose: Enables automatic folding of mirrors when the ignition is switched on, rather than when the vehicle is locked. The vehicle must...
T-Roc (A1) – Front Assist settings
Purpose: activates the distance control on the screen menu, to adjust Front Assist parameters. Information: This setting is only possible if the...
T-Roc (A1) – Full sunroof opening with remote control
Purpose: Allows the sunroof to open fully when opening with the remote control. Proceed : 1 - Engine off, ignition off, connect...
T-Roc (A1) – Haldex traction adjustment
Purpose: to adjust the logic of the AWD system to increase traction or reduce noise generated by the Haldex AWD mechanism. (For...
T-Roc (A1) – Headlamp call with fog lamps
Purpose: Allows fog lamps to be used in addition to high beam. Warning! There are 6 lines of coding to do here....
T-Roc (A1) – Headlamp washer settings
Purpose: to manage the number of manual activations before the headlamp washer is activated on Xenon / to set the delay time...
T-Roc (A1) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (hill-start assist) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
T-Roc (A1) – Image display on ODB / Virtual Cockpit
Purpose: Add album art, radio station logos and contact photos to the ODB or Active Info Display/Virtual Cockpit. Watch out! There are...
T-Roc (A1) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
T-Roc (A1) – Increase the distance between curb and car (Park Assist)
Purpose: to set the distance between the kerb and the car during Park Assist. Proceed : 1 - Engine off, ignition off,...
T-Roc (A1) – Interior lighting deactivated when trunk is opened
Purpose: deactivates interior lighting when only the trunk is opened. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
T-Roc (A1) – KESSY automatic keyless entry
Purpose: automatically locks the vehicle when you leave it with the key, provided the KESSY system (keyless entry/locking and starting system) is...
T-Roc (A1) – Key operation with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
T-Roc (A1) – Lane Assist activation
Purpose: to activate Lane Assist for vehicles with Sign Assist and/or Light Assist options. Vehicle must be equipped with 3Q0 or 2Q0...
T-Roc (A1) – Lane Assist settings
Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...
T-Roc (A1) – Lap Timer
Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
T-Roc (A1) – License plate illumination, open trunk
Purpose: turns on license plate illumination when trunk / tailgate is open. Warning! There are 3 lines of coding to do here....
T-Roc (A1) – Light Assist activation
Purpose: to activate the high beam assistant for vehicles with Sign Assist and/or Lane Assist options. Vehicle must be equipped with 3Q0...
T-Roc (A1) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...
T-Roc (A1) – Lower passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” and the function must be activated...
T-Roc (A1) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
T-Roc (A1) – Meter display on Virtual Cockpit
Purpose: Allows you to modify and customize the Active Info Display / Virtual Cockpit in order to increase the speedometer's maximum speed....
T-Roc (A1) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
T-Roc (A1) – Mirror folding adjustment by remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
T-Roc (A1) – Modify power steering hardness
Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic). Warning:...
T-Roc (A1) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :...
T-Roc (A1) – ODB make-up quantity display
Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect...
T-Roc (A1) – Oil temperature on ODB
Purpose: to display oil temperature on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
T-Roc (A1) – Panel display on ODB / Virtual Cockpit
Purpose: displays speed limit signs on the ODB/Virtual Cockpit (Sign Assist) Vehicle must be equipped with 3Q0 camera Warning! There are 9...
T-Roc (A1) – Particle-effect display on ODB/Virtual Cockpit
Purpose: To modify and customize the Active Info Display / Virtual Cockpit / ODB with a particle / checkerboard effect. (For AID...
T-Roc (A1) – R logo on Virtual Cockpit
Purpose: to display an R logo on the Active Info Display / Virtual Cockpit. (For AID v2) Procedure: 1 - Engine off,...
T-Roc (A1) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
T-Roc (A1) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! There are 4 lines of coding...
T-Roc (A1) – Retain exterior lighting with mirrors folded down
Purpose: to maintain exterior lighting with mirrors folded down when opening/closing. Warning! There are 2 lines of coding to do here. Proceed...
T-Roc (A1) – Set ACC control in 1 km/h increments
Purpose: to adjust the ACC distance setting from the factory setting so that it can be set in 1 km/h increments by...
T-Roc (A1) – Speed of radar deactivation (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
T-Roc (A1) – Speed threshold settings for cornering light activation
Purpose: to set the speed thresholds for turning on and off the cornering lights via the fog lights. (Corner Lights) Warning! There...
T-Roc (A1) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
T-Roc (A1) – Switching on Corner Lights in reverse
Purpose: to activate the Corner Lights (AFS) in reverse. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
T-Roc (A1) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
T-Roc (A1) – Temperature in degrees Celsius or Fahrenheit
Purpose: Selects the format in which the temperature is displayed on the instrument cluster (ODB in Celsius (C°) or Fahrenheit (F°)). Proceed...
T-Roc (A1) – Third brake light on when trunk is open
Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to...
T-Roc (A1) – Valves / flaps exhaust always open
Purpose: to deactivate exhaust valves/flaps in the always open position. (For T-Roc R only) (This coding makes the car think there are...
T-Roc (A1) – Vehicle Hold Assist
Purpose: To set the memory of the Auto Hold button (A) - the Auto Hold function can be set to be always...
T-Roc (A1) – Virtual Cockpit vehicle modification
Purpose: to modify the vehicle on the Active Info Display / Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect your...
T-Roc (A1) – Wiper angle in service mode position
Purpose: to change the angle at which the wipers are positioned when in replacement mode. Proceed : 1 - Engine off, ignition...