VW T6.1 (2019-2024) Facelift / VW Transporter T6.1 / Multivan 7F Facelift / California / Kombi / Caravelle
Transporter (T6.1) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
Transporter (T6.1) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
Transporter (T6.1) – Activate Driving School mode
Purpose: Adds a driving-school mode view to Discover, displaying turn signals, speed, etc. (also ideal for accompanied driving). Warning! There are 3...
Transporter (T6.1) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
Transporter (T6.1) – Activate Off-Road mode on Discover
Purpose: to add Offroad mode to Discover Pro or Discover Media with navigation. Warning! There are 3 lines of coding to do...
Transporter (T6.1) – Activate rearview camera (retrofit)
Purpose: to activate the reversing camera after it has been retrofitted to the Discover. Proceed : 1 - Engine off, ignition off,...
Transporter (T6.1) – Activate trailer coupling (retrofit)
Purpose: Enables trailer / towbar retrofit. Watch out! Adaptation in motor control unit 01 is not accepted for some models. In this...
Transporter (T6.1) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
Transporter (T6.1) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
Transporter (T6.1) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Transporter (T6.1) – Coming Home automatic
Purpose: Automatically activates the Coming Home function (no need to make a headlight call). Proceed : 1 - Engine off, ignition off,...
Transporter (T6.1) – Corner Lights activation
Purpose: to activate Corner Lights with fog lamps. Warning! There are 6 lines of coding to do here. Proceed : 1 -...
Transporter (T6.1) – Daytime running light deactivation (DRL) with handbrake on
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
Transporter (T6.1) – Daytime running lights (DRL) on/off with Discover
Purpose: to activate/deactivate daytime running lights (DRL) from Discover in the CAR menu. ATTENTION to your country's regulations and technical inspection for...
Transporter (T6.1) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Proceed : 1 - Engine off,...
Transporter (T6.1) – Deactivate MirrorLink
Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover MIB. The Mirrorlink service is no longer available since June 1,...
Transporter (T6.1) – Deactivate open door alarm using contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
Transporter (T6.1) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
Transporter (T6.1) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1 -...
Transporter (T6.1) – Disable AM frequency on Discover
Purpose: to disable the AM radio frequency on Discover (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1 -...
Transporter (T6.1) – Disable rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
Transporter (T6.1) – Disable right-hand overtaking prevention
Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left...
Transporter (T6.1) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
Transporter (T6.1) – Fan speed display for air conditioning in Auto mode
Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...
Transporter (T6.1) – Fold down mirrors with ignition on
Purpose: Enables automatic folding of mirrors when the ignition is switched on, rather than when the vehicle is locked. The vehicle must...
Transporter (T6.1) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (Hill-holding) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Transporter (T6.1) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
Transporter (T6.1) – KESSY automatic keyless entry
Purpose: automatically locks the vehicle when you leave it with the key, provided the KESSY system (keyless entry/locking and starting system) is...
Transporter (T6.1) – Key operation even with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
Transporter (T6.1) – Lane Assist settings
Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...
Transporter (T6.1) – Lap Timer
Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Transporter (T6.1) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...
Transporter (T6.1) – Make-up quantity displayed on ODB
Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect...
Transporter (T6.1) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Transporter (T6.1) – Mirror folding adjustment by remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
Transporter (T6.1) – Modify warning thresholds for icy conditions
Goal: Select the outdoor temperature value for icy conditions for which the warning is displayed on the dashboard. (Ice Warning) Proceed :...
Transporter (T6.1) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :1...
Transporter (T6.1) – Oil temperature on ODB
Purpose: to display oil temperature on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Transporter (T6.1) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
Transporter (T6.1) – Rear window defrost time setting
Purpose: to set the duration of rear window defrost operation. (Multivan, California...) Proceed : 1 - Engine off, ignition off, connect your...
Transporter (T6.1) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Warning! There are 5 lines of coding to...
Transporter (T6.1) – Set ACC control in 1 km/h increments
Purpose: to adjust the ACC distance setting from the factory setting so that it can be set in 1 km/h increments by...
Transporter (T6.1) – Speed of radar deactivation (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Transporter (T6.1) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...