Skoda Fabia 3 (NJ) (2014-2021)
Fabia (NJ) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
Fabia (NJ) – Activate Driving School mode
Purpose: Adds a driving-school view to the Amundsen and Bolero, displaying turn signals, speed, etc. (also ideal for accompanied driving). Warning! There...
Fabia (NJ) – Activate fog lamps as daytime running lights (DRL)
Purpose: to activate daytime running lights (DRL) with fog lamps. Warning! There are 2 lines of coding to do here. Proceed :...
Fabia (NJ) – Activate Off-Road mode
Purpose: to add Offroad mode to the Amundsen MIB screen with navigation. Warning! There are 3 lines of coding to do here....
Fabia (NJ) – Activate window operation with ignition switch off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
Fabia (NJ) – Activate/deactivate windshield wipers on key removal
Purpose: to activate windshield wiper stop when the key is removed (wipers stop directly in the position they were in) or to...
Fabia (NJ) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
Fabia (NJ) – Automatic door locking
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Fabia (NJ) – Automatic door locking after 30s
Purpose: to set automatic door unlocking when the vehicle has been unlocked but no doors have been opened for 30 seconds. Procedure:...
Fabia (NJ) – Automatic door unlocking
Purpose: to configure automatic door unlocking when the ignition key is removed. Procedure: 1 - Engine off, ignition off, connect your official...
Fabia (NJ) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
Fabia (NJ) – Automatic window closure when locked
Purpose: automatically closes the windows when the car is locked. A new menu will be activated in door settings to deactivate the...
Fabia (NJ) – Automatically folding mirrors
Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...
Fabia (NJ) – Change Bolero start logo
Purpose: to display another logo when your Bolero car radio is launched. Proceed : 1 - Engine off, ignition off, connect your...
Fabia (NJ) – Change warning thresholds for icy conditions
Goal: Select the outdoor temperature value for icy conditions for which the warning is displayed on the dashboard. (Ice Warning) Proceed :...
Fabia (NJ) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Fabia (NJ) – Coming / Leaving Home with fog lamps
Purpose: To use the fog lamps for Coming Home and Leaving Home. Proceed : 1 - Engine off, ignition off, connect your...
Fabia (NJ) – Coming / Leaving Home with fog lamps, Xenon and LEDs
Goal: Add fog lamps for Coming Home and Leaving Home in addition to LEDs and Xenon. Warning! There are 5 lines of...
Fabia (NJ) – Coming Home automatic
Purpose: Automatically activates the Coming Home function (no need to make a headlight call). Proceed : 1 - Engine off, ignition off,...
Fabia (NJ) – Coming Home on opening the driver’s door
Purpose: Starts Coming Home when the driver's door is opened, not when the ignition key is removed. Proceed : 1 - Engine...
Fabia (NJ) – Corner lights activation
Purpose: to activate Corner Lights with fog lamps. Warning! There are 6 lines of coding to do here. Proceed : 1 -...
Fabia (NJ) – Corner Lights with turn signals
Purpose: to activate the Corner Lights on the side where the flasher is activated. Proceed : 1 - Engine off, ignition off,...
Fabia (NJ) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the on-board computer. Note: these changes affect the display of instantaneous consumption, average consumption...
Fabia (NJ) – Daytime running light deactivation (DRL) with handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
Fabia (NJ) – Daytime running lights (DRL) on/off via display
Purpose: to activate/deactivate the daytime running lights (DRL) from the Amundsen/Columbus. ATTENTION to your country's regulations and technical inspection for daytime running...
Fabia (NJ) – Deactivate AM frequency
Purpose: to disable the AM radio frequency on the display (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...
Fabia (NJ) – Deactivate MirrorLink
Purpose: deactivates / removes MirrorLink from SmartLink on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on...
Fabia (NJ) – Deactivate open door alarm with ignition
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
Fabia (NJ) – Deactivate rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
Fabia (NJ) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
Fabia (NJ) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1 -...
Fabia (NJ) – Disable horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
Fabia (NJ) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
Fabia (NJ) – Electronic differential lock (XDS)
Purpose: to set the electronic differential lock (XDS) The electronic differential lock (XDS) is an extension of the well-known EDS function. XDS...
Fabia (NJ) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Fabia (NJ) – Headlights with fog lamps
Purpose: Allows fog lamps to be used in addition to high beam. Warning! There are 2 lines of coding to do here,...
Fabia (NJ) – Hill Start Assist
Purpose: to set Hill Start Assist operation. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Fabia (NJ) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
Fabia (NJ) – Lap Timer
Purpose: to add the stopwatch to the ODB (on-board computer). Only for vehicles with Color ODB. Proceed : 1 - Engine off,...
Fabia (NJ) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Fabia (NJ) – Mirror folding adjustment with remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
Fabia (NJ) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Needle Sweep) Proceed : 1 - Engine off,...
Fabia (NJ) – Oil temperature on ODB
Purpose: to display oil temperature on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Fabia (NJ) – Radar deactivation speed (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Fabia (NJ) – Rear lights activated with daytime running lights (DRL)
Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Attention! There are 1 or 8 lines of coding to...
Fabia (NJ) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
Fabia (NJ) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
Fabia (NJ) – Top-up quantity display on ODB
Purpose: to display the amount of fuel used since refuelling on the ODB (on-board computer). Proceed : 1 - Engine off, ignition...
Fabia (NJ) – US turn signal
Purpose: to activate US indicators. Watch out! Here, there are 6 lines of coding to be seen 10. Proceed : 1 -...
