Seat Ateca 5F KH (2016+ )
Ateca (5F) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
Ateca (5F) – Activate AirCare memory function
Purpose: to activate the AirCare function's air-conditioning memory. In the factory setting, this is deactivated when you leave the vehicle. Once set,...
Ateca (5F) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
Ateca (5F) – Activate driver profile customization
Purpose: to activate driver profiles on the ODB or Virtual Cockpit and on the MIB screen, to be selected according to the...
Ateca (5F) – Activate Driving School mode
Purpose: Adds a driving-school mode view to Easy Connect, displaying turn signals, speed, etc. (also ideal for accompanied driving). Warning! There are...
Ateca (5F) – Activate fog lamps as daytime running lights (DRL)
Purpose: to activate daytime running lights (DRL) with fog lamps. Warning! There are 2 lines of coding to do here. Proceed :...
Ateca (5F) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the...
Ateca (5F) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
Ateca (5F) – Activate Off-Road mode
Purpose: to add Offroad mode to the Easy Connect MIB V2 screen with navigation. Warning! There are 3 lines of coding to...
Ateca (5F) – Activate parking lights on both sides
Purpose: activates the parking lights on both sides of the vehicle, instead of the default single-side activation via the turn signal switch....
Ateca (5F) – Activate rearview camera (retrofit)
Purpose: To activate the reversing camera after installation (Low or High camera retrofit). Procedure: 1 - Engine off, ignition off, connect your...
Ateca (5F) – Activate speedometer lighting with parking lights
Purpose: to activate the instrument cluster lighting when the parking/position lights are switched on. Proceed :1 - Engine off, ignition off, connect...
Ateca (5F) – Activate the Carbon Look on Easy Connect
Purpose: to activate the carbon look on the Easy Connect MIB. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Ateca (5F) – Activate trailer hitch (retrofit)
Purpose: Enables trailer / towbar retrofit. Please note! Adaptation in motor control unit 01 is not accepted for some models. In this...
Ateca (5F) – Activate window operation with ignition off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
Ateca (5F) – Activate/deactivate windshield wipers on key removal
Purpose: to activate windshield wiper stop when the key is removed (wipers stop directly in the position they were in) or to...
Ateca (5F) – Activation of High Beam Assist (Light Assist)
Purpose: to activate the high beam assistant for vehicles with Sign Assist and/or Lane Assist options. Vehicle must be equipped with 3Q0...
Ateca (5F) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
Ateca (5F) – Adjusting the Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
Ateca (5F) – Ambient Light activation (colors)
Purpose: to activate the Ambient Light option on your MIB for changing screen and Virtual Cockpit colors (depending on your MIB version,...
Ateca (5F) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
Ateca (5F) – Automatic headlamp activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Ateca (5F) – Automatic window closure in the event of rain
Purpose: Automatically closes windows and sunroof when it rains. Watch out! There are 4 lines of coding to do here. Proceed :...
Ateca (5F) – Automatically folding mirrors
Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...
Ateca (5F) – Change Easy Connect start logo
Purpose: to display another logo when your Easy Connect car radio is launched. Proceed : 1 - Engine off, ignition off, connect...
Ateca (5F) – Change ODB language
Purpose: Select the language of your on-board computer. Perfect if you're importing your Ateca. Proceed : 1 - Engine off, ignition off,...
Ateca (5F) – Change warning thresholds for icy conditions
Goal: Select the outdoor temperature value for which the warning is displayed on the dashboard. (Ice Warning) Proceed : 1 - Engine...
Ateca (5F) – Changing the Virtual Cockpit display
Purpose: to modify and customize the Active Info Display / Virtual Cockpit. Depending on the setting, the display of the counter and/or...
Ateca (5F) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Ateca (5F) – Coming / Leaving Home with fog lamps
Purpose: To use the fog lamps for Coming Home and Leaving Home. Proceed : 1 - Engine off, ignition off, connect your...
Ateca (5F) – Coming Home automatic
Purpose: Automatically activates the Coming Home function (no need to make a headlight call). Proceed : 1 - Engine off, ignition off,...
Ateca (5F) – Coming Home on opening the driver’s door
Purpose: Starts Coming Home when the driver's door is opened, not when the ignition key is removed. Proceed : 1 - Engine...
Ateca (5F) – Compass display on ODB
Purpose: to display a compass on the ODB (on-board computer), if you have GPS navigation (NAV), and to change its position on...
Ateca (5F) – Complete opening of sunroof with remote control
Purpose: Allows the sunroof to open fully when opening with the remote control. Proceed : 1 - Engine off, ignition off, connect...
Ateca (5F) – Corner lights activation
Purpose: to activate Corner Lights with fog lamps. Warning! There are 6 lines of coding to do here. Proceed : 1 -...
Ateca (5F) – Corner Lights in reverse
Purpose: to activate the Corner Lights (AFS) in reverse. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Ateca (5F) – Corner Lights with turn signals
Purpose: to activate the Corner Lights on the side where the flasher is activated. Proceed : 1 - Engine off, ignition off,...
Ateca (5F) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the Trip Computer/Virtual Cockpit. Note: these changes affect the display of instantaneous consumption, average...
Ateca (5F) – Cupra Flag on Virtual Cockpit
Purpose: to display the Cupra flag on the Active Info Display / Virtual Cockpit (AID V1 / SW 1701 / before 2020)....
Ateca (5F) – Cupra Sport meter
Purpose: Activates Cupra's central sport meter on the Virtual Cockpit screen (from late 2018). Proceed : 1 - Engine off, ignition off,...
Ateca (5F) – Daytime running light deactivation (DRL) with handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
Ateca (5F) – Daytime running lights (DRL) on/off via display
Purpose: to activate/deactivate daytime running lights (DRL) from the CAR menu. ATTENTION to your country's regulations and technical inspection for daytime running...
Ateca (5F) – Deactivate coupling between roller blind and sunroof
Purpose: cancels the coupling of roller blinds and panoramic sunroofs, allowing them to be adjusted separately. Procedure: 1 - Engine off, ignition...
Ateca (5F) – Deactivate driving mode selection LED
Purpose: to deactivate the LED display when DriveMode Eco, Sport or Individual is set. The center console button LED is off in...
Ateca (5F) – Deactivate MirrorLink
Purpose: deactivates / removes MirrorLink from Full Link on the MIB. The Mirrorlink service is no longer available since June 1, 2020...
Ateca (5F) – Deactivate open door alarm with contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
Ateca (5F) – Deactivate rear fog light warning
Purpose: to deactivate the warning message on the dashboard, which will remind you to turn on the rear fog lights when you...
Ateca (5F) – Deactivate roller blind when locking/unlocking
Purpose: To deactivate the roller blind comfort function when locking/unlocking. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Ateca (5F) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (Lining change mode) Proceed...
Ateca (5F) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
Ateca (5F) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1 -...
Ateca (5F) – Delete LED fog lamp error
Purpose: removes the ODB error after installation of LED fog lamps. Watch out! There are 4 lines of coding to do here....
Ateca (5F) – Delete power tailgate beeps
Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Ateca (5F) – Disable AM frequency
Purpose: to disable the AM radio frequency on the display (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...
Ateca (5F) – Disable audio reduction for parking assistance
Purpose: deactivates sound reduction when reverse gear is engaged or parking aid is activated manually. Procedure: 1 - Engine off, ignition off,...
Ateca (5F) – Disable horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
Ateca (5F) – Disable rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
Ateca (5F) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
Ateca (5F) – Driving Mode on ODB
Purpose: Displays the driving mode selection on the ODB (On-Board Computer). Proceed : 1 - Engine off, ignition off, connect your official...
Ateca (5F) – Easy Entry
Purpose: automatically retracts the electric driver's seat when the ignition is switched off and the door is opened (access aid). This option...
Ateca (5F) – Electronic differential lock (XDS)
Purpose: to set the electronic differential lock (XDS) The electronic differential lock (XDS) is an extension of the well-known EDS function. XDS...
Ateca (5F) – Enable CD/DVD extraction
Purpose: activates the function for copying multimedia data (music, films, etc.), similar to the SD card function. Allows you to import /...
Ateca (5F) – Fan speed display on air conditioning in Auto mode
Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...
Ateca (5F) – Flash mode lights during emergency braking
Purpose: activates flashing lights during emergency braking. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Ateca (5F) – Fold down mirrors with ignition on
Purpose: Enables automatic folding of mirrors when the ignition is switched on, rather than when the vehicle is locked. The vehicle must...
Ateca (5F) – Front Assist settings
Purpose: activates the distance control on the screen menu, to adjust Front Assist parameters. Information: This setting is only possible if the...
Ateca (5F) – Headlights with fog lamps
Purpose: Allows fog lamps to be used in addition to high beam. Warning! There are 2 lines of coding to do here,...
Ateca (5F) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (Hill-holding) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Ateca (5F) – Increase door lighting intensity
Purpose: to increase the intensity of door lighting. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Ateca (5F) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
Ateca (5F) – Interior lighting deactivated when trunk is opened
Purpose: deactivates interior lighting when only the trunk is opened. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Ateca (5F) – KESSY automatic keyless entry
Purpose: automatically locks the vehicle when you leave it with the key, provided the KESSY system (keyless entry/locking and starting system) is...
Ateca (5F) – Key operation with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
Ateca (5F) – Lane Assist activation
Purpose: to activate Lane Assist for vehicles with Sign Assist and/or Light Assist options. Vehicle must be equipped with 3Q0 or 2Q0...
Ateca (5F) – Lane Assist settings
Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...
Ateca (5F) – Lap Timer
Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Ateca (5F) – License plate illumination, open trunk
Purpose: turns on license plate illumination when trunk / tailgate is open. Warning! There are 3 lines of coding to do here....
Ateca (5F) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...
Ateca (5F) – Make-up quantity display on ODB
Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect...
Ateca (5F) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Ateca (5F) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Ateca (5F) – Mirror folding adjustment with remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
Ateca (5F) – Modify power steering hardness
Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic). Warning:...
Ateca (5F) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :...
Ateca (5F) – ODB Carbon Look
Purpose: Activates the “Carbon” display on the ODB screen. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Ateca (5F) – Oil temperature on ODB
Purpose: to display oil temperature on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Ateca (5F) – Opposed-phase rear turn signals and LEDs
Purpose: activates rear turn signals and LED tail lights in phase opposition. Watch out! There are 24 lines of coding to do...
Ateca (5F) – Panel display on ODB / Virtual Cockpit
Purpose: displays speed limit signs on the ODB/Virtual Cockpit (Sign Assist) Vehicle must be equipped with 3Q0 camera Watch out! There are...
Ateca (5F) – Parking aid display on Easy Connect
Purpose: Enables the display of reversing radars on Easy Connect, for vehicles that only have the rear radar option. Procedure: 1- Engine...
Ateca (5F) – Passenger mirror down when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
Ateca (5F) – Radar deactivation speed (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Ateca (5F) – Rear lights activated with daytime running lights (DRL)
Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Watch out! There are 1 or 4 lines of coding...
Ateca (5F) – Rear wiper comfort display on screen
Purpose: to display the rear wiper comfort wipe function in the CAR menu. This means you can disable the automatic wiper function...
Ateca (5F) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Warning! There are 5 lines of coding to...
Ateca (5F) – Speed threshold settings for cornering light activation
Purpose: to set the speed thresholds for turning on and off the cornering lights via the fog lights. (Corner Lights) Warning! There...
Ateca (5F) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
Ateca (5F) – Temperature in degrees Celsius or Fahrenheit
Purpose: Selects the format in which the temperature is displayed on the instrument cluster (ODB in Celsius (C°) or Fahrenheit (F°)). Proceed...
Ateca (5F) – Third brake light on when trunk is open
Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to...
Ateca (5F) – Trailer Assist activation
Purpose: to activate Trailer Assist, which takes control of steering when the trailer is attached. Trailer direction is determined by the mirror...
Ateca (5F) – Vehicle Hold Assist
Purpose: To set the memory of the Auto Hold button (A) - the Auto Hold function can be set to be always...
Ateca (5F) – Virtual Cockpit vehicle modification
Purpose: to modify the vehicle on the Active Info Display / Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect your...
