Audi TT 8S (FV) MK3 (2014-2023) / Audi TTS / TTRS / Roadster
TT (8S) – 120 km/h overrun warning
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
TT (8S) – Activate a second phone via Bluetooth
Purpose: Allows you to connect two phones simultaneously via Bluetooth to the MMI if you don't have the Audi Phone Box option....
TT (8S) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
TT (8S) – Activate G-Meter
Purpose: Adds the G-Meter (Accelerometer) to the Virtual Cockpit screen. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
TT (8S) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the door if it...
TT (8S) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
TT (8S) – Activate Power/Torque
Purpose: Adds Boost/Torque to the Virtual Cockpit screen. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
TT (8S) – Activate rearview camera (retrofit)
Purpose: To activate the reversing camera after it has been installed on the MMI (camera retrofit Low or High). Procedure: 1 -...
TT (8S) – Activate third brake light as daytime running light
Purpose: Allows you to have the third brake light on with an intensity of your choice, obviously if you brake, the brake...
TT (8S) – Activate window operation with ignition off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
TT (8S) – Activate/deactivate daytime running lights (DRL) from Virtual Cockpit
Purpose: to activate/deactivate the daytime running lights (DRL) from the MMI and Virtual Cockpit. ATTENTION to your country's regulations and technical inspection...
TT (8S) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
TT (8S) – Adjust Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
TT (8S) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
TT (8S) – Automatic folding of mirrors
Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...
TT (8S) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
TT (8S) – Automatic window closure in the event of rain
Purpose: Automatically closes windows and sunroof when it rains. Watch out! There are 4 lines of coding to do here. Proceed :...
TT (8S) – AUX-IN activation (retrofit)
Purpose: To activate the AUX (Auxiliary) socket on the rear of the MMI MIB1, for retrofit installation of CarPlay / Android Auto...
TT (8S) – Back-up radar display in Virtual Cockpit
Purpose: Activates the display of reversing radars on the Virtual Cockpit, for vehicles that only have the Audi Parking System rear option....
TT (8S) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
TT (8S) – Coming / Leaving Home with Daytime Running Lights (DRL)
Purpose: Allows use of daytime running lights (DRL) for Coming Home and Leaving Home. (Warning: test coding, save your original code) Watch...
TT (8S) – Corner Lights activation
Purpose: to activate Corner Lights with fog lamps. Warning! There are 6 lines of coding to do here. Proceed : 1 -...
TT (8S) – Correction of Virtual Cockpit fuel consumption display
Purpose: to correct the fuel consumption display in the Virtual Cockpit. Note: these changes affect the display of instantaneous consumption, average consumption...
TT (8S) – Daytime running light deactivation (DRL) using the handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
TT (8S) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Proceed : 1 - Engine off,...
TT (8S) – Deactivate aileron
Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding!...
TT (8S) – Deactivate audio reduction for parking assistance
Purpose: deactivates sound reduction when reverse gear is engaged or parking aid is activated manually. Procedure: 1 - Engine off, ignition off,...
TT (8S) – Deactivate automatic aileron folding
Purpose: to deactivate automatic spoiler folding when the spoiler has been deployed manually or after the doors have been locked (different spoiler...
TT (8S) – Deactivate horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
TT (8S) – Deactivate open door alarm with contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Procedure: 1...
TT (8S) – Deactivate rear fog light warning
Purpose: to deactivate the warning message on the dashboard, which will remind you to turn on the rear fog lights when you...
TT (8S) – Deactivate right-hand overtaking prevention
Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left...
TT (8S) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (Lining change mode) Proceed...
TT (8S) – Deactivation of Audi Parking System engagement beep
Purpose: deactivates the beep when the Audi Parking System is engaged. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
TT (8S) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light on the virtual cockpit when driving without a seatbelt. Proceed : 1 -...
TT (8S) – Disable AM frequency on the MMI
Purpose: to deactivate the AM radio frequency on the MMI in the Virtual Cockpit (AM radio frequency is rarely used, unlike FM...
TT (8S) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
TT (8S) – Electronic differential lock (XDS)
Purpose: to set the electronic differential lock (XDS) The electronic differential lock (XDS) is an extension of the well-known EDS function. XDS...
TT (8S) – Enable CD/DVD extraction
Purpose: activates the function for copying multimedia data (music, films, etc.), similar to the SD card function. Allows you to import /...
TT (8S) – Exhaust valves always open
Purpose: to deactivate exhaust valves in the always open position. (Exhaust Flap open delete) (For Audi TTS only / for Audi TTRS...
TT (8S) – Flash mode lights during emergency braking
Purpose: activates flashing lights during emergency braking. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
TT (8S) – Fold down mirrors with ignition on
Purpose: Enables automatic folding of mirrors when the ignition is switched on, rather than when the vehicle is locked. The vehicle must...
TT (8S) – Haldex traction adjustment
Purpose: to adjust the logic of the AWD system to increase traction or reduce noise generated by the Haldex AWD mechanism. (For...
TT (8S) – Headlamp washer settings
Purpose: to manage the number of manual activations before the headlamp washer is activated on Xenon Led / to set the delay...
TT (8S) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (Hill-holding) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
TT (8S) – Increase distance between curb and car (Park Assist)
Purpose: to set the distance between the kerb and the car during Park Assist. Proceed : 1 - Engine off, ignition off,...
TT (8S) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with S Tronic, more significant than with manual). Proceed : 1 - Engine...
TT (8S) – Interior lighting deactivated when trunk is opened
Purpose: deactivates interior lighting when only the trunk is opened. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
TT (8S) – Key operation even with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
TT (8S) – Lane Assist activation
Purpose: to activate Lane Assist for vehicles with Sign Assist and/or Light Assist options. The vehicle must be equipped with the camera...
TT (8S) – Lane Assist settings
Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...
TT (8S) – Lap Timer
Purpose: to add the stopwatch to the Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
TT (8S) – License plate illumination, open trunk
Purpose: turns on license plate illumination when trunk / tailgate is open. Warning! There are 3 lines of coding to do here....
TT (8S) – Light Assist activation
Purpose: to activate the high beam assistant for vehicles with the Sign Assist or Lane Assist option. (High Beam Assist for Xenon...
TT (8S) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. (High Beam Assist)...
TT (8S) – Light Assist settings
Purpose: to set the speed thresholds for activation/deactivation of the high beam assistant (light assist). Information: no longer works on TT Facelift...
TT (8S) – Lower passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
TT (8S) – Maintain DRL intensity with turn signals
Purpose: to maintain the intensity of the daytime running lights (DRL) with the indicators. (TT 8S Phase 1 only) Procedure: 1 -...
TT (8S) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
TT (8S) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
TT (8S) – Mirror folding adjustment by remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
TT (8S) – Modify power steering hardness
Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic). Warning:...
TT (8S) – Modify warning thresholds for icy conditions
Goal: Select the outdoor temperature value for icy conditions for which the warning is displayed on the dashboard. (Ice Warning) Proceed :...
TT (8S) – Needle check
Purpose: to activate the virtual cockpit's hand sweep when the car is started. (Needle Sweep) Proceed : 1 - Engine off, ignition...
TT (8S) – Oil temperature on Virtual Cockpit
Purpose: displays oil temperature in Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
TT (8S) – Opening/closing windows with KESSY
Purpose: to activate closing and opening of windows and sunroof with the KESSY keyless entry system, keep pressing the handle until the...
TT (8S) – Panel display in the Virtual Cockpit
Purpose: displays speed limit signs in the Virtual Cockpit (Sign Assist). The vehicle must be equipped with the 5Q0 camera or the...
TT (8S) – Radar deactivation speed (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
TT (8S) – Rear lights activated with daytime running lights (DRL)
Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Watch out! There are 1 or 2 lines of coding...
TT (8S) – Rear turn signals and fog lamps together
Purpose: activates the rear turn signals and rear fog lights together (switched on at the same time). Warning! There are 2 lines...
TT (8S) – Rear turn signals and LEDs together
Purpose: activates the rear turn signals and LED tail lights together (switched on at the same time). Warning! There are 2 lines...
TT (8S) – Rear turn signals and opposite-phase LEDs
Purpose: activates rear turn signals and LED tail lights in phase opposition. Warning! There are 2 lines of coding to do here....
TT (8S) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Warning! There are 5 lines of coding to...
TT (8S) – Seat heater reduction time setting
Purpose: to set the value in minutes of the heating reduction time for heated seats. As a general rule, Audi vehicles reduce...
TT (8S) – Speed threshold settings for cornering light activation
Purpose: to set the speed thresholds for turning on and off the cornering lights via the fog lights. (Corner Lights) Warning! There...
TT (8S) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
TT (8S) – Top-up quantity display in Virtual Cockpit
Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect...
TT (8S) – Vehicle Hold Assist
Purpose: To set the memory of the Auto Hold button (A) - the Auto Hold function can be set to be always...
TT (8S) – Virtual Cockpit start logo
Purpose: to change the startup logo displayed on the Virtual Cockpit. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
