TT (8J)

VAG Coding VCDS ODBeleven Audi TT 8J

Audi TT 8J MK2 (2006-2014) / Audi TTS / TTRS / Roadster / TT 8J Facelift (specific facelift coding at bottom of page)

TT (8J) – Activate advanced comfort menu in ODB

Purpose: activates the advanced comfort menu in the on-board computer, activating oil temperature and other functions. Modification only possible for vehicles with...

Read more ...

TT (8J) – Activate daytime running lights with fog lamps (DRL)

Purpose: Allows fog lamps to be used as daytime running lights. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...

Read more ...

TT (8J) – Activate mood lighting

Purpose: to activate ambient foot lighting while driving. The footwell lights in the MFA appear in the Light & Visibility menu, where...

Read more ...

TT (8J) – Activate turn signals in US mode

Purpose: to activate US indicators. (TT 8J phase 1 only) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Read more ...

TT (8J) – Aileron lowering on locking

Purpose: to lower the spoiler after the doors have been closed centrally. Procedure: 1 - Engine off, ignition off, connect your official...

Read more ...

TT (8J) – Automatic door locks

Purpose: to set automatic door locking from 15km/h. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Read more ...

TT (8J) – Automatic door unlocking

Purpose: to set automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect your...

Read more ...

TT (8J) – AUX-IN socket activation (retrofit)

Purpose : to activate the AUX-IN input. After installing the jack plug on the car radio connector or a Bluetooth kit (RNS-E...

Read more ...

TT (8J) – Change ODB language

Purpose : Selects the language used in the on-board computer. (Modification only possible on Mid/High range models) Proceed : 1 - Engine...

Read more ...

TT (8J) – Comfort turn signal

Purpose: to activate and set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off,...

Read more ...

TT (8J) – Corner Lights activation

Purpose: to activate cornering lights with fog lamps. Modification only possible for vehicles with a 30-byte module. Procedure: 1 - Engine off,...

Read more ...

TT (8J) – Correction of ODB consumption display

Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...

Read more ...

TT (8J) – Deactivate aileron

Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding!...

Read more ...

TT (8J) – Deactivate automatic aileron folding

Purpose: to deactivate automatic spoiler folding when the spoiler has been deployed manually. Procedure: 1 - Engine off, ignition off, connect your...

Read more ...

TT (8J) – Deactivate brake pad warning light

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...

Read more ...

TT (8J) – Deactivate windshield washer indicator

Purpose: deactivates the windshield washer indicator on the ODB (on-board computer, for TT phase 1 only). Procedure: 1 - Engine off, ignition...

Read more ...

TT (8J) – Delete belt alarm

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...

Read more ...

TT (8J) – Display the speed on the Audi Concert II+.

Purpose: To add a driving-school mode view to the Audi Concert II+ radio, displaying speed (also ideal for accompanied driving) Procedure: 1...

Read more ...

TT (8J) – Door lock/unlock confirmation (beep)

Purpose: Enables confirmation of vehicle locking/unlocking with beeps (alarm) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Read more ...

TT (8J) – Flash mode lights during emergency braking

Purpose: activates brake lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM...

Read more ...

TT (8J) – Modify power steering hardness

Purpose : to adjust the hardness of the power steering for a softer or harder steering wheel. Proceed : 1 - Engine...

Read more ...

TT (8J) – One-touch window closing

Purpose: to activate closing and opening of the windows and sunroof with the remote control WITHOUT remaining pressed until the windows are...

Read more ...

TT (8J) – Rear lights activated with daytime running lights (DRL)

Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Proceed : 1 - Engine off, ignition off, connect your...

Read more ...


VAG Coding VCDS ODBeleven Audi TT 8J facelift

Audi TT 8J MK2 Facelift (2010-2014)

TT (8J) Facelift – Spoiler lowered when locked

Purpose: to lower the spoiler after the doors have been closed centrally. Procedure: 1 - Engine off, ignition off, connect your official...

Read more ...

TT (8J) Facelift – Corner lights activation

Purpose: When the cornering lights are activated, the fog lights come on on the side where the steering wheel is turned at...

Read more ...

TT (8J) Facelift – Activate Daytime Running Lights in ODB

Purpose: to activate/deactivate the daytime running lights (DRL) on the on-board computer. Procedure: 1 - Engine off, ignition off, connect your official...

Read more ...

TT (8J) Facelift – Gear display on ODB

Purpose: to activate the gear display on the on-board computer (for manual gearboxes). Procedure: 1 - Engine off, ignition off, connect your...

Read more ...

TT (8J) Facelift – Speed limit display RNS-E

Purpose : to display the speed limit on the RNS-E navigation screen. ATTENTION: requires RNS-E version 193 Procedure: 1 - Engine off,...

Read more ...

TT (8J) Facelift – APS radar display on RNS-E screen

Purpose : to activate the display of Audi Parking System radars on the RNS-E screen. WARNING: requires RNS-E version 193 and rear...

Read more ...

TT (8J) Facelift – Locking/unlocking beeps

Purpose: Enables vehicle lock/unlock confirmation with beeps (alarm) and adds beep selection menu to ODB (MFA). Procedure : 1 - Engine off,...

Read more ...

TT (8J) Facelift – Needle check

Purpose: activates needle sweep when the car is started. (Needle Sweep) ATTENTION: Only for TTS and TT Facelift compatible according to meter....

Read more ...

TT (8J) Facelift – Lap Timer

Purpose: to add the stopwatch to the ODB (on-board computer). ATTENTION: Only for TTS and TT Facelift compatible according to meter. Procedure:...

Read more ...

TT (8J) Facelift – Comfort Turn Signal

Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...

Read more ...

TT (8J) Facelift – Maintain/decrease DRL with turn signals

Purpose: to maintain or reduce the intensity of the daytime running lights (DRL) with the indicators. Procedure : 1 - Engine off,...

Read more ...

TT (8J) Facelift – Disable plate light control (ODB LED error)

Purpose: Disables license plate light control. Useful when installing LED bulbs without resistance or for error prevention. Procedure: 1 - Engine off,...

Read more ...

TT (8J) Facelift – Deactivate spoiler

Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding!...

Read more ...

TT (8J) Facelift – Deactivate automatic spoiler folding

Purpose: to deactivate automatic spoiler folding when the spoiler has been deployed manually. Procedure: 1 - Engine off, ignition off, connect your...

Read more ...

TT (8J) Facelift – Deactivating the windshield washer indicator

Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off, connect...

Read more ...

TT (8J) Facelift – Flash mode lights during emergency braking

Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...

Read more ...

TT (8J) Facelift – Modifying the RNS-E start screen

Purpose : to change the screen display at RNS-E start-up. CAUTION (Some RNS-E settings are directly related to the selected model. It...

Read more ...

TT (8J) Facelift – Remove belt alarm

Purpose: to suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt (for models from 2010)....

Read more ...

TT (8J) Facelift – Lock the RNS-E’s CD/DVD eject button

Purpose: To lock/unlock the RNS-E's CD/DVD eject button. Protection against theft of your navigation DVD. Procedure: 1 - Engine off, ignition off,...

Read more ...


Translate »
error: Content is protected !!
Enable Notifications OK No thanks