Audi R8 (42) (2007-2015)
R8 (42) – Activate AUX-IN socket (retrofit)
Purpose : to activate the AUX-IN input. After installing the jack plug on the connector or a Bluetooth kit on the RNS-E,...
R8 (42) – Aileron deactivation
Purpose: to disable spoiler operation. If you code the spoiler deployed or closed, it will be locked in the position after coding!...
R8 (42) – Aileron lowering on locking
Purpose: to lower the spoiler after the doors have been closed centrally. Proceed : 1 - Engine off, ignition off, connect your...
R8 (42) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
R8 (42) – Automatic door unlocking
Purpose: to set automatic door unlocking when the ignition key is removed. Procedure: 1 - Engine off, ignition off, connect your official...
R8 (42) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
R8 (42) – Change RNS-E startup screen
Purpose : to change the screen display at RNS-E start-up. CAUTION (Some RNS-E settings are directly related to the selected model. It...
R8 (42) – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
R8 (42) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
R8 (42) – Disable automatic aileron folding
Purpose: to deactivate automatic aileron folding when the aileron has been deployed manually. Proceed : 1 - Engine off, ignition off, connect...
R8 (42) – Disable plate light control (ODB LED error)
Purpose: Disables license plate light control. Useful when installing LED bulbs without resistance or for error prevention. Procedure: 1 - Engine off,...
R8 (42) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
R8 (42) – Lap Timer
Purpose: to add the stopwatch to the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
R8 (42) – Maintain/decrease DRL intensity with turn signals
Purpose: to maintain or reduce the intensity of the daytime running lights (DRL) with the indicators. Procedure : 1 - Engine off,...
R8 (42) – Microphone sensitivity adjustment
Purpose: Adjusts microphone intensity. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then...
R8 (42) – Needle check
Purpose: activates needle sweep when the car is started. (Needle Sweep) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
R8 (42) – ODB speed ratio display
Purpose: to activate the gear display on the on-board computer (for manual gearboxes). Procedure: 1 - Engine off, ignition off, connect your...
R8 (42) – RNS-E speed limit display
Purpose : to display the speed limit on the RNS-E navigation screen. ATTENTION: requires RNS-E version 193 Procedure: 1 - Engine off,...
R8 (42) – Synchronized mirror adjustment
Purpose : Activates synchronous adjustment of exterior mirrors. When the mirror setting is changed, the second mirror is moved synchronously. Procedure: 1...
R8 (42) – Vehicle lock/unlock beeps
Purpose: Enables vehicle lock/unlock confirmation with beeps (alarm) and adds beep selection menu to ODB (MFA). Procedure : 1 - Engine off,...
