Q3 (8U) - VAG Coding

Audi Q3 8U (2011-2018) / Audi RSQ3 / Q3 8U Facelift / (specific facelift coding at bottom of page)

Q3 (8U) – Activate Auto-Hold Assist (retrofit)

Purpose : to activate Audi Auto-Hold Assist (retrofit). Keeps the vehicle stationary on slopes and downhill gradients for as long as required....

Q3 (8U) – Activate Hill Start Assist

Purpose: to activate Audi Hill Start Assist. Caution: Not to be confused with Audi Hold Assist, which keeps the vehicle stationary on...

Q3 (8U) – Activate trailer hitch (retrofit)

Purpose: Enables trailer / towbar retrofit. Watch out! For Facelift model. Adaptation in motor control unit 01 is not accepted for some...

Q3 (8U) – Activate/deactivate daytime running lights (DRL) from MMI

Purpose: to activate/deactivate the daytime running lights (DRL) from the MMI. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...

Q3 (8U) – Ambient light intensity

Purpose: Used to adjust ambient lighting intensity. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...

Q3 (8U) – APS radar frequency

Purpose : to select the Audi Parking System radar frequency. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...

Q3 (8U) – APS radar volume

Purpose : to select the volume of the Audi Parking System radars. Proceed : 1 - Engine off, ignition off, connect your...

Q3 (8U) – Audi Parking System deactivation speed

Purpose : to select the deactivation speed of the Audi Parking System. Proceed : 1 - Engine off, ignition off, connect your...

Q3 (8U) – Automatic door locking from 15km/h

Purpose: Automatically locks doors at speeds over 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Q3 (8U) – Automatic door unlocking

Purpose: to configure automatic door unlocking when the ignition key is removed. Procedure: 1 - Engine off, ignition off, connect your official...

Q3 (8U) – Automatic folding of mirrors

Purpose: Automatically folds mirrors when vehicle is locked. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Q3 (8U) – Automatic headlight activation from 140 km/h

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...

Q3 (8U) – AUX-IN activation (retrofit)

Purpose: To activate the AUX (Auxiliary) socket on the rear of the MMI 2G 3G 3GPLUS, for retrofitting to CarPlay / Android...

Q3 (8U) – Change MMI RMC start logo

Purpose: to change the Splash Screen of the MMI RMC. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Q3 (8U) – Comfort flashing light

Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...

Q3 (8U) – Coming / Leaving Home with fog lamps

Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...

Q3 (8U) – Coming / Leaving Home with Xenons

Purpose: Activates xenon headlamps instead of fog lamps for Coming Home and Leaving Home. Procedure : 1 - Engine off, ignition off,...

Q3 (8U) – Coming Home time setting

Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...

Q3 (8U) – Corner lights activation

Purpose: When the cornering lights are activated, the fog lights come on on the side where the steering wheel is turned at...

Q3 (8U) – Correction of ODB consumption display

Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...

Q3 (8U) – Daytime running light deactivation (DRL) with handbrake

Purpose: to deactivate the daytime running lights (DRL) when the handbrake is engaged. Procedure: 1 - Engine off, ignition off, connect your...

Q3 (8U) – Deactivate brake pad warning light

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...

Q3 (8U) – Deactivate rear wiper when reversing

Purpose: to deactivate automatic activation of the rear windshield wiper during reversing when the front windshield wipers are operating. Procedure: 1 -...

Q3 (8U) – Deactivate windshield washer indicator

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...

Q3 (8U) – Deactivate/activate electric handbrake for rear brake pad change

Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (EPB reset / Lining...

Q3 (8U) – Deactivation of Audi Parking System engagement beep

Purpose : deactivates the beep when the Audi Parking System is engaged. Proceed : 1 - Engine off, ignition off, connect your...

Q3 (8U) – Defrost time setting

Purpose: to set the operating time for mirror and rear window defrosting. Procedure: 1 - Engine off, ignition off, connect your official...

Q3 (8U) – Flash mode lights during emergency braking

Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...

Q3 (8U) – High beam assistant setting

Purpose : to set the speed at which the high beam assistant is activated and deactivated. Proceed : 1 - Engine off,...

Q3 (8U) – Increase distance between curb and car (Park Assist)

Purpose: to set the distance between the kerb and the car during Audi Park Assist. Proceed : 1 - Engine off, ignition...

Q3 (8U) – Leaving Home time setting

Purpose: to set the length of time the headlights remain on after the car is unlocked. Procedure: 1 - Engine off, ignition...

Q3 (8U) – Lights on automatically in the event of rain

Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure: 1 - Engine off, ignition...

Q3 (8U) – Lock CD/DVD eject button on MMI RMC

Purpose: locks/unlocks the CD/DVD eject button on the MMI RMC. Protection against CD theft. Procedure: 1 - Engine off, ignition off, connect...

Q3 (8U) – Lower passenger mirror when reversing

Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...

Q3 (8U) – Maintain LED intensity with indicators

Purpose: to maintain LED intensity with indicators. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Q3 (8U) – MMI sound reduction with Audi Parking System

Purpose : automatically reduces the MMI sound when using the Audi Parking System. Proceed : 1 - Engine off, ignition off, connect...

Q3 (8U) – Needle check

Purpose: activates needle sweep when the car is started. (Needle Sweep) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...

Q3 (8U) – Parking aid display on MMI

Purpose: activates the display of reversing radars on the MMI, for vehicles with the Audi Parking System rear option only. Requires at...

Q3 (8U) – Rear daytime running lights (DRL)

Purpose: to activate the rear lights as daytime running lights at the same time as the front TFL LEDs (Scandinavian DRL). Procedure:...

Q3 (8U) – Reprogramming a new battery

Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! Depending on your calculator, select 61...

Q3 (8U) – Start/Stop deactivation

Purpose: to disable Start and Stop completely. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Q3 (8U) – Suppress belt alarm

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1 -...

Q3 (8U) – Switch on front fog lights when reversing

Purpose: to activate front fog lamps when reversing. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Q3 (8U) – Tear Wiping

Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...

Q3 (8U) – Vehicle lock/unlock beeps

Purpose: Activates beeps when vehicle is locked/unlocked. Only for vehicles with original alarm (1 beep for locking, 2 beeps for unlocking) Procedure...

Q3 (8U) – Visual confirmation of comfort closure

Purpose: to activate the flashers once the comfort closure has been completed. Procedure: 1 - Engine off, ignition off, connect your official...

Q3 (8U) – Xenon presentation mode

Purpose : Activates xenon light kinematics when the vehicle is started. Proceed : 1 - Engine off, ignition off, connect your official...

VAG Coding VCDS ODBeleven Audi Q3 8U facelift

Audi Q3 8U Facelift (2015-2018)

List of new Audi Q3 8U codings

List OBDeleven One-Click Apps Audi Q3 8U