
Audi A4 B7 (8E/8H) (2004-2008) / Audi S4 / RS4 / Allroad / Avant
A4 (B7) – Activate AUX-IN socket (retrofit)
Purpose : to activate the AUX-IN input. After installing the jack plug on the car radio connector or a Bluetooth kit (RNS-E...
A4 (B7) – Activate comfort indicators
Purpose: to activate the comfort indicators. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
A4 (B7) – Activate turn signals in US mode
Purpose: activates US indicators Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug...
A4 (B7) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
A4 (B7) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. Procedure: 1 - Engine off, ignition...
A4 (B7) – Change ODB language
Purpose: to change the language of messages on the driver information system display. (MFA Midline and Highline) Proceed : 1 - Engine...
A4 (B7) – Comfort closing confirmation
Purpose: Activates comfort closing confirmation. The indicators will light up (x1) when the windows and sunroof are fully closed. Procedure: 1 -...
A4 (B7) – Coming Home duration setting
Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...
A4 (B7) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...
A4 (B7) – Cruise control activation (Retrofit)
Purpose: to activate the speed regulator after installation (retrofit). Caution: To carry out this modification, it's essential to check that you have...
A4 (B7) – Deactivate rear wiper when reversing
Purpose: to deactivate automatic activation of the rear windshield wiper during reversing when the front windshield wipers are operating. (A4 Avant) Procedure:...
A4 (B7) – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
A4 (B7) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
A4 (B7) – Display pilot light on counter
Purpose: to display the pilot light on the counter. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
A4 (B7) – Display speed on Audi Concert II+.
Purpose: To add a driving-school mode view to the Audi Concert II+ radio, displaying speed (also ideal for accompanied driving) Procedure: 1...
A4 (B7) – Door lock/unlock confirmation (beep)
Purpose: Enables vehicle lock/unlock confirmation with beeps. the vehicle must be equipped with the original alarm. Procedure: 1 - Engine off, ignition...
A4 (B7) – Door lock/unlock confirmation (turn signals)
Purpose: activates confirmation of vehicle locking/unlocking with turn signals. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
A4 (B7) – Lights on automatically when it rains
Purpose: Automatically turns on lights when it rains. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
A4 (B7) – Memory 1 on ODB of KMs traveled
Purpose: Activates memory 1 for km covered, average speed, time since start... These memories will be reset after an engine shutdown lasting...
A4 (B7) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
A4 (B7) – Modify RNS-E start-up screen
Purpose : to change the screen display at RNS-E start-up. CAUTION (Some RNS-E settings are directly related to the selected model. It...
A4 (B7) – Selective door locking/unlocking
Purpose: activates selective locking/unlocking of doors. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer,...
A4 (B7) – Speed limit display RNS-E
Purpose : to display the speed limit on the RNS-E navigation screen. ATTENTION: requires RNS-E version 193 Procedure: 1 - Engine off,...
A4 (B7) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...