VW T6 (2015-2019) / VW Transporter T6 / Multivan 7F / California / Kombi / Caravelle
Transporter (T6) – Activate daytime running lights (DRL) only with headlight switch in Auto position
Purpose: to activate daytime running lights (DRL) only when the light switch is in Auto position. Procedure: 1 - Engine off, ignition...
Transporter (T6) – Activate Off-Road mode on Discover PQ
Purpose: to add Offroad mode to Discover PQ with navigation. Warning! There are 3 lines of coding to do here. Proceed :...
Transporter (T6) – Activate rearview camera (retrofit)
Purpose: to activate the reversing camera after installation for Discover PQ (retrofit). Proceed : 1 - Engine off, ignition off, connect your...
Transporter (T6) – Activating Coming / Leaving Home
Purpose: Activates Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Transporter (T6) – Add daytime running lights (DRL) to ODB
Purpose: to add daytime running light (DRL) activation/deactivation to the ODB (on-board computer). Procedure : 1 - Engine off, ignition off, connect...
Transporter (T6) – Automatic door locks
Purpose : Enables automatic door locking at speeds over 15km/h to be set. Information: If auto-lock doesn't work, deactivate and reactivate coding...
Transporter (T6) – Automatic door unlocking
Purpose: to set automatic door unlocking when the key is removed. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Transporter (T6) – Automatic headlamps from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Transporter (T6) – Automatic headlight activation in the rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure : 1 - Engine off,...
Transporter (T6) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Transporter (T6) – Corner Lights activation
Purpose: Activating the cornering lights switches on the fog lamp on the side where the steering wheel is turned at speeds under...
Transporter (T6) – Daytime running lights off (DRL) with handbrake on
Purpose: to deactivate the daytime running lights (DRL) when the handbrake is engaged. Procedure: 1 - Engine off, ignition off, connect your...
Transporter (T6) – Deactivate MirrorLink
Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover PQ MIB. The Mirrorlink service is no longer available since June...
Transporter (T6) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Transporter (T6) – Disable AM frequency on Discover
Purpose: to disable the AM radio frequency on the Discover PQ (AM radio frequency is rarely used, unlike FM radio frequency). Procedure:...
Transporter (T6) – Disable plate lighting control (ODB LED error)
Purpose: Disables license plate light control. Useful when installing LED bulbs without resistance or for error prevention. Procedure: 1 - Engine off,...
Transporter (T6) – Door lock/unlock confirmation (beep)
Purpose: Enables vehicle lock/unlock confirmation with beeps (with alarm) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Transporter (T6) – Enable USB port for iPhone CarPlay (retrofit)
Purpose: Enables the USB port for iPhone CarPlay accounting (after activating App Connect and changing the USB and/or USB cable) for Discover...
Transporter (T6) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Transporter (T6) – Lower passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
Transporter (T6) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Transporter (T6) – Needle check
Purpose: activates needle sweep when the car is started. (Needle Sweep) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Transporter (T6) – Opening/closing windows with remote control
Purpose: to activate closing and opening of the windows and sunroof with the remote control WITHOUT remaining pressed until the windows are...
Transporter (T6) – Selective door unlocking
Purpose: Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all doors,...
Transporter (T6) – Start/Stop deactivation
Purpose: To completely deactivate the Start/Stop. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer,...